JINGSONG RESEARCH GROUP

Cellulose and Fiber Based Advanced Materials at South China University of Technology

华南理工大学陶劲松纤维先进材料实验室

Papers

Hao Jia, Mahmut Dirican, Chen Chen, Pei Zhu, Chaoyi Yan, Xia Dong, Zhuang Du, Jiansheng Guo, Jiasheng Wang, Fangcheng Tang, Jinsong Tao*, Xiangwu Zhang*. Carbon-coated CoS@rGO anode material with enhanced cyclic stability for sodium storage. Materials Letters, 2018, 233: 158-161 (SCI IF=2.687)

Yichuan Guo, Zhiqiang Fang, Mingde Du, Long Yang, Leihou Shao, Xiaorui Zhang, Li Li, Jidong Shi, Jinsong Tao, Jinfen Wang, Hongbian Li, Ying Fang. Flexible and biocompatibao nanopaper-based electrode arrays for neural activity recording. Nano Research, 2018, 1-11 (SCI)

Yuan Chang-long, Wang Rui-ping, Fu jun-jun, Tao Jin-song. Hydrophobic Modification of TEMPO-oxidized Cellulose Nanofibers. Paper Science & Technology. 2017, 36:16-20

J Tao, X Long, Z Li, G Ying. Reusing tissue paper mill effluent water as corrugated paper mill intake water: Case study of a new clean production measure, Environmental Progress & Sustainable Energy 2017, 10.1002/ep.12747 (IF=1.672)

J Tao, Z Li, X Peng, G Ying. Quantitative analysis of impact of green stormwater infrastructures on combined sewer overflow control and urban flooding control. Frontiers of Environmental Science & Engineering, 2017, 11 (4), 11(IF=1.716)

J Tao, Z Fang, W Bao, M Zhu, Y Yao, Y Wang, J Dai, A Zhang, C Leng, D Henderson, Z Wang, L Hu*. Super-Clear Nanopaper from Agro-Industrial Waste for Green Electronics. Advanced Electronic Materials, 2017, 3(5): 1600539 (SCI IF=4.193)

Yonggang Yao*, Jingsong Tao*, Jianhua Zou*, Bilun Zhang, Junbiao Peng, Liangbing Hu*, etc. Light management in plastic-paper hybrid substrate towards high-performance optoelectronics, Energy Environ. Sci., 2016, 9, 2278-2285 DOI:10.1039/C6EE01011C (SCI IF= 29.518)

LI Yuan-hua,TAO Jing-song*, Liu Huan-bin, etc., Building predicting model of paper tensile strength based on partial least-squares approach, CIESC, 2014, 65(9):3544-3550

TAO Jing-song*, Yan Yafan, Li Yuanhua, Comparison of Paper Tensile Strength Prediction Models Based on PLS and SVM Methods, Journal of South China University of Technology, 2014, 42(7):132-137

Dinghua Zhang, Huanbin Liu, Jigeng Li, Jingsong Tao. Research on Technological Innovation Applied in Paper Dry System for Energy Saving and Optimization Based on Muti-Agents and Government Behavior Influencing its Development. Paper Sci.& Tech. 2014,(04):10-14

LI Yuan-hua, TAO Jing-song*, Liu Huan-bin, etc. Research Progress of Paper Sheet Tensile Strength Models, China Pulp and Paper, 2013

Xiaobin Chen, Jigeng Li, Jingsong Tao*. Water Reuse in a Paper Mill Based on Water Pinch Technology, China Pulp and Paper, 2013(03):14-19

Jia Liu, Xiaolin Zhu, Jingsong Tao. Effect of Direct Dye on Character of Pulp Fiber and Discussion of Its Application, Paper Sci& Tech., 2013,(1):73-78

Tao Jingsong, Yang Pisen. Study on sheet bonding and break strength characteristics, Applied Mechanics and Materials, 2012,(187):41-45

Tao Jingsong,Zhu Xiaolin, Liu Huanbin, Status and Thinking on the R&D of Pulp&Paper Technology in Canada, Paper Sci& Tech, 2012,31(6):163-167

Li Yuan-hua, Liu Huan-bin, Li Ji-geng, Tao Jing-song, Lv Wen-bin. The Comparison between Two Methods of Chemical Conditioning in Sewage Sludge Dewatering. Paper Sci. & Tech., 2012,(04)

Li Yugang, Liu Huanbin, Tao Jingsong*, etc. Simultaneous module-based optimization of operation parameters of dryer section in paper machine Journal of South China University of Technology (Natural Science) ,2011,39 (3):8-12

Tao Jingsong, Liu Huanbin. A method to determine sheet relative bonded area using the fiber flexibility index, Instrumentation Science & Technology, 2011,6:161-172

Kung Lingbo, Liu Huangbin, Tao Jingsong*, etc. Waste Heat Integration of Coating Paper Machine Drying Process. Drying Technology, 2011,29(4):442-450

Li Yugang, Liu Huanbin, Tao Jingsong*, etc. Process Parameters Optimization for Energy Saving in Paper Machine Dryer Section. Drying Technology, 2011,29(8):910-917

LIANG Yu; LIU Huan-bin; TAO Jingsong*, etc. A feasibility study on water stairs-using between a tissue paper mill and a kraft paper mill, China Pulp & Paper Industry, 2011,24:31-34

LIANG Yu; LIU Huan-bin; TAO Jingsong*, etc. Influence of Water Reusing between Tissue Paper Mill and Kraft Paper Mill on Kraft Paper Properties, Paper and Paper Making, 2011,10:4-7

CHEN Sheng, TAO Jingsong* and LI Ji-geng, etc. Study on the Feasibility of Water Cascade Using Between Two Papermaking Mills, China Pulp & Paper,2011,30(10):38-41

Kongling Bo, Liu Huanbin, Li Jigeng, Tao Jingsong. Potential Analysis and Application Techniques of Energy Efficiency in Papermaking Process.China Pulp and Paper,2011,(08)

Liu Huanbin,Li Jigeng, Tao Jingsong. SomeThought on Developing Low-carbon Paper Industry,China Pulp and Paper,2011,(01)

Tao Jingsong, Liu Huanbin,etc. Survey of energy utilization in Guangdong paper mills, International Symposium on Emerging Technologies of Pulping and Papermaking ,Guangzhou, People R. China, Nov. 08-10, 2010, S China Univ Technol; Natl Nat Sci Fdn China; Minist Sci & Technol China; Minist Educ China, Research Progress In Paper Industry And Biorefinery (4th ISETPP), Vols 1,-3:1272-1275, 2010

Kung Lingbo, Liu Huangbin, Tao Jingsong*, etc. Utilizing exhaust heat effectively for improving thermal energy efficiency in a paper machine, International Symposium on Emerging Technologies of Pulping and Papermaking ,Guangzhou, People R. China, Nov. 08-10, 2010, S China Univ Technol; Natl Nat Sci Fdn China; Minist Sci & Technol China; Minist Educ China, Research Progress In Paper Industry And Biorefinery (4th ISETPP), Vols 1,-3:1264-1267, 2010

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Modelling of Wet-end White Water Consistency Based on Light Scattering and Absorption Theory, 2010 3rd International Conference on Computer and Electrical Engineering (ICCEE 2010), Chendu, China, Nov. 16-18,2010

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Optimization Analysis of Multiple Steam Turbines and Condensers in Paper Mill Power Plant International Conference on Renewable Energies and Power Quality (ICREPQ’10), Granada (Spain), 23th to 25th March, 2010.European Association for the Development of Renewable Energies, Environment and Power Quality

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Modelling Sheet Relative Bonded Area with Fiber Flexibility, 2010 the 2nd International Conference on Computer Engineering and Technology (ICCET 2010), Chendu, China, April 16-19,2010

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Energy and Exergy Measurement for Papermaking Processes, Measurement & Control, 2010, 43(4):116-119

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Optimization Model of Turbines and Boilers Load Distribution in Paper Mill Power Plant, 2010 the 2nd International Conference on Computer Engineering and Technology (ICCET 2010), Chendu, China, April 16-19,2010

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Condensers Optimization Model based on Turbine System Load Analysis in paper mill power plant, 2010 the 2nd International Conference on Computer Engineering and Technology (ICCET 2010), Chendu, China, April 16-19,2010

Tao Jingsong, Liu Huanbin. Study on modeling sheet strength based on papermaking process parameters, Journal of Basic Science and Engineering, 2010, V18, NSUPPL, P41-51

Tao Jingsong, Li Jigeng, Liu Huanbin, etc. Condensers Optimization Model based on Turbine System Load Analysis in paper mill power plant, 2010 the 2nd International Conference on Computer Engineering and Technology (ICCET 2010), Chendu, China, April 16-19,2010

Dinghua Zhang, Liu Huanbin, Tao Jingsong, etc.. Research on an Energy Collaboration Approach of Drying Section Energy Networks of Paper Machine Based on an Extended Contract Net Protocol, Part I. Paper Sci.& Tech,2010,(06)

Dinghua Zhang, Liu Huanbin, Tao Jingsong, etc.. Research on an Energy Collaboration Approach of Drying Section Energy Networks of Paper Machine Based on an Extended Contract Net Protocol, Part II. Paper Sci.& Tech., 2010,(06)

Wei Yajing, Zhu Xiaolin, Liu Huanbin, Li Jigeng, Tao Jingsong. Study on the Difference of Fiber Morphology of Eucalyptus Pulp Refined at Different Consistencies, Pulp & paper Sci., 2010,(04)

Li Yugang, Liu Huanbin, Tao Jingsong,etc. Optimization and Analysis of Heat-Recovery in Drying-section of Coating Machine Based on Pinch Technology. Transaction of China Pulp and Paper,2010,(02)

Zhu Xiaolin , Liu Huanbin, Tao Jingsong. Modelling the stickies dispersing mechanism in disk dispersers, Jounal of Shanxi University of Science & Technology,2010,(01)

Tao, JS; Li, JS ; Liu, HB . Optimal design of paper mill process energy with mathematical programming and three-link modeling. Abs. of the Am. Chem. Soc. 2009(238):16

Tao Jingsong, Li Jingeng and Kong Lingbo, etc. Analysis and Diagnosis of Papermaking Process Energy System Based on Three-Link Model, Paper Science & Technology, 2009,28(6):24-30

Zhang Dinghua, Li Jigeng, Liu Huanbin, Tao Jingsong, etc. Design of“Three-link” Energy Structure Optimized MAS Model for Paper-making Process. China Pulp and Paper, 2009,(10)

Tao Jingsong, Liu Huanbin, Xie Xinan, A soft-sensor model of paper tensile strength, As. of the Am. Chem. Soc. 2008, Aug. 17-21

Tao Jingsong, Liu Huanbin, Li Jigeng, etc. Energy analysis of paper mill based on three-link model, As. of the Am. Chem. Soc. 2008,Aug. 17-21

Li Yu-gang, Tao Jingsong, Liu Huan-bin, Analysis of Energy Using Based on Thermodynamics on Dry Section of Paper Machine. The International Conference on Pulping, Papermaking and Biotechnology 2008. November 3-7,2008, nanjing, P.R.China,2008(B):609-612

Yin Yong-jun , Tao Jingsong, Liu Huan-bin, Li Ji-geng. Cascade Utilization of the Steam in Paper Mills. The International Conference on Pulping, Papermaking and Biotechnology 2008. November 3-7,2008, nanjing, P.R.China,2008(B):363-368

Tao Jingsong, Yin Yongjun and Liu Huanbin etc. Study on Energy Analysis of a Pulp and Paper Mill Based on Three-Link Model, Paper Science & Technology, 2008,(6):26-35

Yin Yongjun, Tao Jingsong, Li Jigeng, etc. Cascade Utilization of Steam in Paper Mills. Paper and Papermaking, 2008,(06)

Tao Jingsong, Liu Huanbin and Chen Xiaoquan, etc. Effect of Sheet Moisture Content on Fiber Relative Bonded Area and Shear Tensile Strength, Paper Science & Technology, 2007,(2):1-5

Li Yugang, Liu Huanbin, Guo Panxing, Tao Jingsong, etc. Methods of Energy-saving in Paper Industry and Case Analysis, Paper Sci.& Tech., 2007,(06)

TAO Jing-song, LIU Huan-bin YAN Dong-bo,etc. Evaluation of the Flexibility of Pulp Fibers, China Pulp & Paper, 2006,(4): 1-5

TAO Jing-song, LIU Huan-bin,YAN Dong-bo,etc. A New Method for Determining Fiber-Fiber Shear Bond Strength, Transactions of China Pulp and Paper, 2006:(4)74-80

TAO Jing-song, YAN dong-bo, LIU Huan-bin, Etc. A new measuring method to the relative bonded area. 3rd International Symposium on Emerging Technologies of Pulping & Papermaking (ISETPP), Guangzhou,China, Nov.8-10, 2006

Tao Jing-song, Yan dong-bo, Liu Huan-bin,Etc. A study of the relation between and the relative bonded area and fiber flexibility, Part I: the basic theory,measuring and extrapolation methods. Journal of Shanxi University of Science & Technology,2005,(5):6-11

Tao Jing-song, Yan dong-bo, Liu Huan-bin, Etc. A study of the relation between the relative bonded area and fiber flexibility, Part II: Correlation investigation. Journal of Shanxi University of Science &Technology, 2005,(6):1-9

TAO Jing-song, YAN dong-bo, LIU Huan-bin, Etc. A study of the relation between the relative bonded area and the fiber flexibility: Part I: the basic theory, measuring and extrapolation methods. Journal of Shanxi Sci. and Tech., 2005,(5):6-9

TAO Jing-song, YAN dong-bo, LIU Huan-bin, Etc. A study of the relation between the relative bonded area and the fiber flexibility: Part II: Correlation investigation. Journal of Shanxi Sci. and Tech., 2005,(6):1-4

Tao Jingsong, Yan Dongbo, Liu Huanbin, Etc. Study on fiber bonding strength in modeling of paper tensile strength with fiber characteristics. As. of the Am. Chem. Soc. 2005,(6)

Tao Jingsong, Chen Gang and Zhu Miaonan,etc. Study on the Testing of Print Quality of Uncoated Ink-Jet Paper, Guangdong Pulp & Paper, 2004(6):63-67

Tao Jingsong, Chen Gang. An automatic measuring system for the print quality of digital photo paper. Abs. of the Am. Chem. Soc. 2004,(3)

Jingsong Tao, Gang Chen, Zhu Miaonan, Tang Aiming and Zhang Hongwei. An Automatic Measuring System for Print Quality of Coated Ink-jet Paper.Proceeding The International papermaking & Environment Conference. May 12-14,2004, Tianjin, P.R.China 2004(B):363-368

Tao Jingsong, Chen Gang, etc. An Automatic Measuring System for the Printing Quality of Ink-Jet Paper. China Pulp & Paper. 2004(10):17-20

Tao JS, Chen G, Etc. An automatic measuring system for the print quality of digital photo paper. Abstract of The American Chemical Society. 2004,(3)

Tao Jingsong, Chen Gang, etc. Application of Digital Image Processing Technology to Paper Analysis. China Pulp & Paper. 2003,(7):45-50

Tao Jingsong, Chen Gang, Liu Songpo. pplication of Digital Image Processing Technology to Fibre Analysis in Paper Industry Part Ⅱ: Fibre Analysis, Guangdong Pulp & Paper, 2003,(01).39-44

Chen Gang, Tao Jingsong. Progress of Paper Ink-jet Printing Quality Analysis Technology. China Pulp & Paper. 2002,(6):50-55

Chen Gang, Tao Jingsong, Wang Xiaoping. Dyeing of the bottom sheet for fireproof board. 2nd International Symposium on Emerging Technologies of Pulping & Papermaking (ISETPP), Guangzhou, China, Oct9-11, 2002.p714- 717

Chen Gang, Tao Jinsong, Yu Jialuan, Chen Jiaxiang. Characteristics of high yield chemical pulping of bagasse. 2nd International Symposium on Emerging Technologies of Pulping & Papermaking (ISETPP), Guangzhou, China, Oct9-11, 2002.p229- 235

Tao Jingsong, Chen Gang Liu, songpo. Application of Computer Image Processing Technology in Fibre Analyses of Paper IndustryPart I: Lignocellulosic Fiber Feature Analyses, Guangdong Pulp & Paper, 2002,(06):51-55

Liu Songpo, Chen Gang, Tao Jingsong, etc. Application of Amphoteric Polyacryamide on Waste Paper Pulp. Paper Sci & Tech, 2002,(02)

Tao Jingsong, Chen Gang, etc. The initial effect study of modified chitosan on sheet physical properties. Pulp and Paper Science and Technology, 2001,(4):16-18

Patents

Jingsong Tao, One kind of flexible OLED lighting substrate fabrication and application made by cellulose nano-composites, 201610074972.4

Jingsong Tao, One kind of flexible OLED bottom emission display substrate fabrication and application made by cellulose nano-composites, 201610073040.8

Jingsong Tao, the method of measuring plant fiber elastic modulus, CN102539235A

Huanbin Liu, Jingsong Tao, Dongbo Yan, Xiaoquan Chen, Xiaolin Zhu, one kind of method to measuring fiber-fiber shear force strength, CN101042395

Huanbin Liu, Jigeng Li, Jingsong Tao, Xiaolin Zhu, Xinan Xie, Comprehensive optimization and control system of paper mill energy system, CN201255834

Jigeng Li, Huanbin Liu, Jingsong Tao, Xiaolin Zhu, One kind of advanced system of pulp bleaching, CN201343671

Jigeng Li, Huanbin Liu, Yongjun Yin, Jingsong Tao, Zhanbo Zhang, Yanming Zhou, One kind of paper mill co-generation of heat and power energy optimization system, CN201716569U

Jigeng Li, Huanbin Liu, Yugang Li, Peng Jiang, Jingsong Tao, Xiaohong Li, The monitor system of paper machine dry section energy system, CN101760980A

Xiaolin Zhu, Jigeng Li, Huanbin Liu, Jingsong Tao, Zhanbo Zhang, Yunxuan Huang, One instrument of measuring sludge specific resistance, CN203037547U

Xiaolin Zhu, Jigeng Li, Huanbin Liu, Jingsong Tao, Zhanbo Zhang, Yunxuan Huang, The system of measuring sludge dewater ability, CN203037648U

Book Chapters

Theory and technology of soft-measurement for pulp characters, Liu Huanbin, China Light Industry Press,Beijing, 2009

New concept papermaking technologies and paper based functional materials, China Science and Technology Press,Beijing, 2014